טלפון

03-617-6888

רחוב כנרת 15, בני-ברק
5120260 ישראל

CALL US

972-3-6176888

15Kineret st,Beni-Brak

5120260 Israel

FOX3 Matrix 24x

FOX3 Matrix 24x

FOX3 Matrix 24x

Modular Fiber Optic Matrix Switcher from 8×8 to 24×24

Key Features

  • Coming Soon LinkLicense for KVM System Configuration and Control package
  • I/O sizes from 8×8 to 24×24
  • Switches 4K/60 video, audio, USB, control, and 3D sync over fiber optic cable
  • Compatible with all Extron FOX3 Series transmitters and receivers
  • Dante® audio network interface, DMP expansion port, and analog audio inputs and outputs
  • RS-232 insertion from the Ethernet control port

The Extron FOX3 Matrix 24x provides high-performance switching of 4K/60 video, audio, USB, control, and 3D sync over fiber optic cable. Expandable from 8×8 up to 24×24, this modular matrix switcher also features RS-232 insertion from the Ethernet port, extending bidirectional control to any FOX3 endpoint. The Ethernet port supports SSH protocol, ensuring communication between the control system and the matrix is encrypted. Dante, DMP Expansion, and analog audio I/O ports enable audio embedding and de-embedding. Equipped with many additional integrator-friendly features, such as a hot-swappable power supply, an optional redundant hot-swappable power supply, and system monitoring, the FOX3 Matrix 24x delivers highly reliable, enterprise-wide switching of fiber optic AV, USB, and control for mission-critical environments.

FOX3 Matrix 24x System Diagram

FOX3 Matrix 24x
TRUE 4K specification
   
   Frame rate324, 25, 30, 50, or 60 fps
   Chroma sampling34:4:4, 4:2:2
   Color bit depth2,38, 10, or 12 bits per color
   Signal typeHDMI 2.0, HDCP 2.3
   Max. video data rate18.0 Gbps
    NOTE1Supports lossless 4K video over one fiber or uncompressed 4K video over two fibers.

2Supports 12-bit color bit depth for uncompressed 4K video over two fibers. When using a FOX3 SR scaling receiver, the scaler must be in bypass mode to pass 4K video with a 12-bit color bit depth.

3Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate.

 NOTEThis product contains Class 1 laser. It meets the safety regulation of IEC 60825-1, FDA 21 CFR 1040.10,
and FDA 21 CFR 1040.11.
Optical specifications
   Number/type8 singlemode or 8 multimode SFPs per board
   Connectors16 LC connectors per I/O board
   Signal type8 to 24 fiber optic signals
   Routing8 x 8 up to 24 x 24 unidirectional matrix or
4 x 4 up to 12 x 12 bidirectional matrix
   Operating distance
      Singlemode20 km (12.4 miles) with singlemode (SM) cables
      Multimode500 m (1640 feet) with 50 µm OM4 4700 MHz bandwidth laser optimized multimode cables
       NOTEThe system works with OM1, OM2, and OM3 fiber at reduced distances.
    NOTEOperating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
   Nominal peak wavelength850 nm for multimode (MM), 1310 nm for singlemode (SM)
   Transmission power
      Singlemode-5.2 dBm, typical
      Multimode-3.3 dBm, typical
   Maximum receiver sensitivity
      Singlemode-12.6 dBm, typical
      Multimode-13.0 dBm, typical
   Optical loss budget
      Singlemode+7.4 dB, maximum
      Multimode+9.7 dB, maximum
   Maximum channel data rate10 Gbps
Audio input/output board
   Number/signal type2 analog stereo inputs, balanced/unbalanced
2 analog stereo outputs, balanced/unbalanced
   Connectors(4) 3.5 mm captive screw connector, 5 pole
   Source formats2 channel LPCM
   Impedance≥10 k ohms unbalanced, ≥20 k ohms balanced
   Nominal level+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
   Maximum level+21 dBu balanced, +15 dBu unbalanced
   Gain rangeAdjustable, -18 dB to +24 dB, 1 dB steps
   GainUnbalanced output: -6 dB; balanced output 0 dB (default)
   Frequency response20 Hz to 20 kHz, ±0.5 dB
   THD + Noise<0.1% @ 20 Hz to 20 kHz at nominal level
   S/N>90 dB at maximum output (unweighted)
   CMRR65 dB @ 20 Hz to 20 kHz
   Output impedance50 ohms unbalanced, 100 ohms balanced (analog only)
   Maximum level (Hi-Z)+21 dBu balanced, +15 dBu unbalanced
   Gain error± 0.5 dB channel to channel
   Volume control range-100 dB to 0 dB (0-100 in 1 dB steps)
   Crosstalk≤-80 dB @ 1 kHz, fully loaded
   Stereo channel separation>80 dB @ 1 kHz
   Bit depth16, 20, 24
   Sampling rate48 kHz
    NOTE0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
AT ports  — Dante audio transport
   Transmission typeDante/AES-67, software selectable
   Connectors2 RJ-45 to Dante interface
   InputsUp to 32 stereo channels
   OutputsUp to 32 stereo channels
   Audio format24 bit uncompressed at 48 kHz sampling rate
   LatencyDeterministic, based on user selections: 0.25 ms, 0.5 ms, 1.0 ms (default), 2.0 ms, 5.0 ms
EXP port
   Transmission typeProprietary
   Connector1 RJ-45
   Inputs8 stereo channels Rx
   Outputs8 stereo channels Tx
   Audio formatUncompressed, 24-bit, 48 kHz
   EXP cableShielded CAT6 up to 10 meters
Communications
   USB configuration port
      Number/type1 front panel mini USB B, female
      StandardEthernet over USB
   Serial control port1 RS-232, 3.5 mm captive screw connector, 3-pole, female, rear panel
      Baud rate and protocol300 to 115200 baud (default: 9600), 8 data bits, 1 stop bit, no parity
      Serial control pin configurationCaptive screw: 1 = Tx, 2 = Rx, 3 = GND
   Ethernet control
      Ethernet port1 RJ-45 connector, female
      Ethernet data rate10/100/1000Base-T, half/full duplex with autodetect
      ProtocolsARP, ICMP (Ping), DHCP, DNS, HTTPS, SFTP, SSH, TCP/IP, UDP/IP
      Default settingsLink speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
   Web serverUp to 200 simultaneous sessions
7.0 MB non-volatile memory
   Program controlExtron Product Configuration Software
Extron Simple Instruction Set (SIS™)
General
   Power supplyInternal, 2* (positive-negative), primary and redundant, hot-swappable
Input: 100-240 VAC, 50-60 Hz
*A redundant power supply is optional.
   Power consumptionEnclosure without boards: 24 watts
Enclosure fully loaded with 3 MM boards: 86 watts
Enclosure fully loaded with 3 SM boards: 95 watts
Each MM board: 20.1 watts
Each SM board: 23.1 watts
   Temperature/humidityStorage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   CoolingFan, right to left (as viewed from front panel)
   Thermal dissipation, full loadMM: 294 BTU/hr
SM: 323 BTU/hr
   Mounting
      Rack mountYes
   Enclosure typeMetal
   Enclosure dimensions3.5" H x 17.0" W x 13.0" D (2U high, full rack wide)
(8.9 cm H x 43.2 cm W x 33.0 cm D)
(Depth excludes connectors and handles.  Width excludes rack ears.)
   Product weight (fully loaded)17 lbs (7.7 kg)
   Regulatory complianceCE, c-UL, C-tick, FCC Class A, ICES, UL, VCCI
Complies with the appropriate requirements of RoHS, WEEE.

לפנות להצעת מחיר וזמן אספקה

For an attractive quote and to order the product

Call : 972-3-6176888

Message Us