טלפון

03-617-6888

רחוב כנרת 15, בני-ברק
5120260 ישראל

CALL US

972-3-6176888

15Kineret st,Beni-Brak

5120260 Israel

DTP2 CrossPoint 82

DTP2 CrossPoint 82

DTP2 CrossPoint 82

8×2 4K/60 Scaling Presentation Matrix Switcher

Key Features

  • All-in-one 8×2 matrix switcher, scaler, audio DSP, audio power amplifier, and control processor
  • DTP2, DisplayPort, and HDMI inputs
  • DTP2 and HDMI outputs
  • Selectable scaled DTP2 output rates from 640×480 to 4K/60 with 4:4:4 color sampling
  • Available with energy efficient Class D stereo or mono amplifier:

    2 x 50 watts @ 4 ohms; 2 x 25 watts @ 8 ohms

    1 x 100 watts @ 70 volts

  • New Available with integrated IPCP Pro 355MQ xi control processor

The Extron DTP2 CrossPoint 82 is an 8×2 matrix switcher that supports signal resolutions up to 4K/60 at 4:4:4 for all inputs and outputs. It features DisplayPort and HDMI inputs, an HDMI output, and Extron DTP2 extension to send 4K/60 video, audio, and control signals up to 330 feet (100 meters) over a shielded CATx cable. The DTP2 matrix output is powered by Extron Vector™ 4K scaling technology, capable of seamless switching, logo keying, and scaled resolutions up to 4K/60. A built-in Extron IP Link® Pro xi control processor and integrated 100‑watt Class D power amplifier make the DTP2 CrossPoint 82 an all-in-one system design solution. It delivers excellent image quality, fast and reliable switching, along with Extron ProDSP audio processing and an HDMI loop-through.

Training Room Diagram

DTP2 CrossPoint 82
TRUE 4K specification
   
   Frame rate124, 25, 30, 50, 60, 120, 144, or 240 fps
   Chroma sampling14:4:4 and 4:2:2; 4:2:0 (at input only)
   Color bit depth18 or 10 bits per color
   Signal typeDVI 1.0, HDMI 1.4 and 2.0, DisplayPort 1.2, HDCP 1.4 and 2.3
   Max. video data rate1
      HDMI18 Gbps (6 Gbps per color)
      DisplayPort21.6 Gbps (5.4 Gbps per lane)
    NOTE• 1 Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to
determine video parameters supported by this data rate.
• 2 4096 x 2160/50-60 at 4:4:4 is available only for HDMI and DisplayPort connections.
• 3 DTP2 and XTP are 8 bits per color for all 4096 x 2160 formats.
• 4 4:2:0 sub-sampling is supported at input only.
 NOTEDTP2 ports are backwards-compatible with DTP endpoints for resolutions up to 4K @ 30 Hz, 4:4:4, or 4K @ 60 Hz, 4:2:0.
Video input
   Number/signal type1 DisplayPort
5 HDMI/DVI
1 HDMI/DVI loop-out, configurable (non-scaled)
​2 DTP2/XTP-configurable
   Connectors1 female DisplayPort
5 female HDMI type A
1 female HDMI type A loop-out
2 female RJ-45
   Horizontal frequency15 kHz to 270 kHz for resolutions up to 18 Gbps
   Vertical frequency24 Hz to 240 Hz for resolutions up to 18 Gbps
   Resolution range640×480 @ 60 Hz through 4096×2160 @ 60 Hz with 4:4:4 chroma sampling
Includes 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2K, and 4K.
   StandardsDVI 1.0, HDMI 1.4 and 2.0, DisplayPort 1.2, HDCP 1.4 and 2.3
Video processing
   Digital sampling8 or 10 bits per color; 600 MHz pixel clock maximum
   Colors1.07 billion (10 bit 4:4:4 processing)
Video Output
   Number/signal type1 HDMI/DVI (non-scaled)
1 DTP2/XTP/HDBT, configurable (scaled)
   Connectors1 female HDMI type A
1 female RJ-45
   Power for active cables1.1 W max. for the HDMI and loop out ports
   Peripheral device power225 mA per output (HDMI and loop outputs only)
   Scaled resolution640×4808, 800×6008, 1024×7688, 1280×7688, 1280×8008, 1280×10248, 1360×7688, 1366×7688, 1440×9008, 1400×10508, 1600×9008, 1680×10508, 1600×12008, 1920×12008, 2048×12008, 2048×15368, 2560×10808, ​2560×14408, 2560×16008, 3840×21601,2,3,4,5,6*,7*,8*, 4096×21601,2,3,4,5, and Custom 1-8
​480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2K1,2,3,4,5,6,7,8
​
123.98 Hz, 224 Hz,325 Hz, 429.97 Hz,530 Hz, 650 Hz, 759.94 Hz, 860 Hz
*Available to a DTP2 Rx
   StandardsDVI 1.0, HDMI 1.4 and 2.0, HDCP 1.4 and 2.3
Audio
   GainUnbalanced output: -6 dB; balanced output: 0 dB
   Frequency response20 Hz to 20 kHz, ±0.5 dB
   THD + Noise<0.1%, 20 Hz to 20 kHz at nominal level
   S/N>90 dB at maximum balanced output (unweighted)
   Crosstalk≤-80 dB @ 1 kHz, fully loaded
   Stereo channel separation>80 dB @ 1 kHz
   Supported formats
      Analog de-embeddingLPCM up to 2.0/24-bit/96 kHz
      HDMI pass-throughLPCM up to 7.1/24-bit/192 kHz, Dolby Atmos, Dolby TrueHD, and Dolby legacy formats
DTS:X, DTS-HD Master Audio, DTS 96/24, and DTS legacy formats
Audio Input
   Number/signal type2 stereo line level, balanced or unbalanced
2 mono mic/line level, balanced or unbalanced, (with available phantom power)
6 stereo, de-embedded from HDMI/DisplayPort (PCM only)
2 DTP2/XTP (de-embedded HDMI—PCM only, or remote unbalanced analog*)
*Available only in DTP mode
   Connectors(2) 3.5 mm, 5 pole captive screw for line
(2) 3.5 mm, 3 pole captive screw for mic/line
5 female HDMI type A
1 female DisplayPort
2 RJ-45 female
   Impedance>10K ohms unbalanced, >20K ohms balanced
   Nominal levelLine inputs: +4 dBu (1.23 Vrms), -10 dBV (316 mVrms), adjustable
Mic/line inputs: -60 dBV, +4 dBu, -10 dBV, adjustable
   Maximum levelLine inputs: +21 dBu balanced, +15 dBu unbalanced
Mic/line inputs: -60 dBV, +4 dBu, -10 dBV, adjustable
   CMRR70 dB @ 1 kHz
   Input gain adjustmentLine inputs: -18 dB to +24 dB in 0.1 dB steps, adjustable per input
LPCM-2Ch inputs: -18 dB to +24 dB in 0.1 dB staps, adjustable per input
Mic/line inputs: -18 dB to +60 dB in 0.1 dB steps, adjustable per input
   DC phantom power+48 VDC ±10% (can be switched on or off per mic/line input)
    NOTEUnbalanced analog inputs applied at a DTP2 transmitter input have +12 dB of gain applied to bring the signal up to a nominal level. 
Audio Output — Line out
   Number/signal type2 stereo or 4 mono, balanced/unbalanced
2 HDMI, embedded (Loop Out and HDMI Out 1 do not support breakaway or audio DSP.)
1 DTP2/XTP/HDPT (embedded digital, and remote balanced/unbalanced analog*)
*Available only in DTP mode
   Connectors(2) 3.5 mm, 5 pole captive screw
2 female HDMI type A
1 female RJ-45
   Impedance50 ohms unbalanced, 100 ohms balanced
   Gain error±0.5 dB channel to channel
   Maximum level (Hi-Z)>+21 dBu, balanced; >+15 dBu, unbalanced
   Output volume range0 to -100 dB in 0.1 dB steps
​(Volume control not available on loop out or HDMI output 1)
    NOTESystem gain for the analog DTP2 receiver output is rated at -12 dB (unbalanced) and -6 dB (balanced).
Audio Output — power amplifier — IPCP models only
   Number/signal type
      SA models1 stereo (default) or 2 mono (2 channels total)
      MA 70 models1 mono, 70 V line
   Connectors
      SA models(1) 5 mm, 4 pole, screw lock captive screw
      MA 70 models(1) 5 mm, 2 pole, screw lock captive screw
       NOTEThe 5 mm screw lock captive screw connector accepts wires of 22 AWG to 12 AWG.
   Load impedance
      SA models4 ohms minimum
      MA 70 models50 ohms minimum
   Amplifier typeClass D
   Output power
      SA models25 watts per channel, 8 ohms, 1 kHz, 0.1% THD, or
​50 watts per channel, 4 ohms, 1 kHz, 0.1% THD
      MA 70 models​​100 watts (rms) @ 70 V, 1 kHz, 0.1% THD
   ProtectionClip limiting, thermal, short circuit, DC output
   Frequency response20 Hz to 20 kHz, -3 dB to +1 dB @ 1 W
   THD + Noise<0.1% @ 1 kHz, 3 dB below clipping
   S/N>90 dB, 20 Hz to 20 kHz, unweighted
Communications
   Serial control port1 bidirectional RS-232, 3.5 mm, 3 pole captive screw connector (rear panel)
   Baud rate and protocol9600, 8 data bits, 1 stop bit, no parity (default)
   Serial control pin configuration1 = Tx, 2 = Rx, 3 = Gnd
   USB control port1 female mini USB B (​front panel)
   USB standardsUSB 2.0, high speed
   Ethernet
      Connector1 female RJ-45*​
*IPCP models use IPCP Ethernet ports.
      Ethernet data rate10/100/1000Base-T, half/full duplex with autodetect
      Ethernet protocolARP, ICMP (ping), IP, TCP, DHCP, HTTP, Telnet
      Ethernet default settingsLink speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
      Storage512 MB user memory
   Program controlExtron Product Configuration Software (PCS) program for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer®​
Communications — IPCP Pro Control Processor with AV LAN — IPCP models only
   Control processor
      IPCP modelsIPCP Pro 355M
      IPCP Q modelsIPCP Pro 355MQ xi
   Memory
      SDRAM
         IPCP models512 MB
         IPCP Q models2 GB
      Flash
         IPCP models4.5 GB
         IPCP Q models8 GB
   Software and control options
      Configuration softwareGlobal Configurator® Plus and Professional for Windows®
      Programming softwareGlobal Scripter®
      Control applicationsGlobalViewer®, eBus®, TouchLink® for Web, Touchlink for iPad®, or TouchLink Pro touchpanels
      Resource management softwareGlobalViewer® Enterprise
      UtilitiesToolbelt, embedded web page
   Hardware user interface
      HardwareTouchLink® Pro touchpanels, NBP button panels, or eBUS® button panels
   Ethernet control
      Network interface controllers (NICs)2: 1 LAN, ​1 AV LAN
      AV LAN network switch1 unmanaged 3 port switch
      Connectors
         LAN​1 female RJ-45
         AV LAN3 female RJ-45
      Ethernet data rate10/100/1000Base-T, half/full duplex with autodetect
      ProtocolsDHCP, DNS, HTTP, HTTPS, ICMP, IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UPD/IP
      Default settings
         LANIP address = 192.168.253.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
​DHCP = Off
DNS = 127.0.0.1
         AV LANLink speed and duplex level = autodetect
DHCP server = disabled
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
         DHCP server disabledIP address = 192.168.254.250
​DNS = 127.0.0.1
         DHCP server enabledIP address = 192.168.254.1
​Dynamic leased IP address pool = 192.168.254.100 – 192.168.254.149
Maximum lease count = 50
​Lease time = 24 hours
   Serial
      Quantity/type1 bidirectional RS-232, RS-422, RS-485 (port 1)
2 bidirectional RS-232 (ports 2 and 3)
      Connectors(1) 3.5 mm captive screw connector, 5 pole
(2) 3.5 mm captive screw connectors, 3 pole
      Baud rate and protocol300 to 115200 baud (9600 baud = default)
8 (default) or 7 data bits
1 (default) or 2 stop bits
no parity (default), even, or odd parity
       NOTEThe 5-pole ports support both hardware and software flow control.
The 3-pole ports support software flow control.
The default for both types of ports is no flow control.
      Pin configurations
         Serial, 5-pole captive screw
         RS-232 (default)Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS
         RS-422Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+
         RS-485Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+
         Serial, 3-pole captive screwPin 1 = Tx, 2 = Rx, 3 = Gnd
   Digital I/O
      Quantity/type4 digital input/output (configurable)
      Connectors(1) 3.5 mm captive screw connector, 5 pole
      Digital inputs
         Input voltage range0 to 24 VDC, clamped at +30 VDC
         Input impedance>10k ohms
         Programmable pullup1k ohms to +5 VDC
         Threshold low to high2.8 VDC
         Threshold high to low2.0 VDC
      Digital outputs250 mA sink from 24 VDC max.
      Pin configurations1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = Gnd
   IR/serial
      Quantity/type2 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz
      Connector(1) 3.5 mm captive screw connector, 5-pole
      Baud rate and protocol (RS-232)300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parity
      Pin configurationsFor each port, pin 1 = signal, 2 = Gnd
      IR output carrier frequency30 kHz to 300 kHz
   Relay
      Quantity/type4 normally open relays
      Relay control connectors(1) 3.5 mm captive screw connector, 6 pole
      Relay control contact rating24 VDC, 1 A
   eBUS control
      eBUS control ports(1) 3.5 mm captive screw connector, 5 pole (uses 4 poles)
      eBUS pin configuration+V = +12 VDC; +S = + signal; -S = – signal; G = ground
      Recommended cable typeExtron STP20-2/1000 or STP20-2P/1000 cable
      Maximum system cable length1000 feet (305 meters) sum total for the eBUS system, regardless of topology. Power injection may be required depending on system cabling topology and primary power supply wattage. See the eBUS Technology Reference Guide for details.
      eBUS power output6 watts
Communications — external device (RS-232/IR over DTP2/XTP/HDBT)
   Serial control pass-through portsDTP2 Tx/XTP matrix to DTP2 CrossPoint 82:
RS-232 can be transmitted to and from DTP2 Tx/XTP matrix via Ethernet insertion.
DTP2 CrossPoint 82 to DTP2/HDBT Rx/XTP matrix:
RS-232 can be transmitted to and from DTP2 Rx/HDBT Rx/XTP matrix via Ethernet insertion.
      Baud ratesUp to 115200 baud
      Protocol6 to 8 data bits
1 or 2 stop bits
Even or odd parity, no parity
Flow control = XON, XOFF, none
   IR control pass-through portDTP2 CrossPoint 82 to TP Rx: (1) 3.5 mm, 3 pole captive screw connector
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
   IR control pin configuration1 = Tx, 2 = Rx, ​3 = Gnd
General
   Power supplyInternal
Input: 100-240 VAC, 50-60 Hz
   Power consumption
      Full power
         DTP2 CrossPoint 8294 watts
         DTP2 CrossPoint 82 IPCP SA127 watts
         DTP2 CrossPoint 82 IPCP MA 70126 watts
      Power save mode
         DTP2 CrossPoint 8234 watts (65 watts for Psav2)
         DTP2 CrossPoint 82 IPCP SA​67 watts (95​ watts for Psav2)
         DTP2 CrossPoint 82 IPCP MA 7070 watts ​(95​ watts for Psav2)
   Temperature/humidityStorage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling
      DTP2 CrossPoint 822 fans, air flows from right to left (when viewed from the front)
      DTP2 CrossPoint 82 IPCP models1 fan, air flows from right to left (when viewed from the front)
   Thermal dissipation
      Full power
         DTP2 CrossPoint 82197 BTU/hr
         DTP2 CrossPoint 82 IPCP SA246 BTU/hr
         DTP2 CrossPoint 82 IPCP MA 70242 BTU/hr
      Power save mode
         DTP2 CrossPoint 82116 BTU/hr (152 BTU/hr for Psav2)
         DTP2 CrossPoint 82 IPCP SA165 BTU/hr ​(190 BTU/hr for Psav2)
         DTP2 CrossPoint 82 IPCP MA 70177 BTU/hr ​(190 BTU/hr for Psav2)
   Mounting
      Rack mountYes, with included, preinstalled brackets
   Enclosure typeMetal
   Enclosure dimensions
      DTP2 CrossPoint 821.75" H x 17.5" W x 10.5" (1U high, full rack wide)
(44 mm H x 444 mm W x 267 mm D)
      DTP2 CrossPoint 82 IPCP models3.50" H x 17.5" W x 10.5" D (2U high, full rack wide)
(89 mm H x 444 mm W x 267 mm D)
   Product weight
      DTP2 CrossPoint 825.3 lbs (2.4 kg)
      DTP2 CrossPoint 82 IPCP models8.0 lbs (3.6 kg)
   Regulatory compliance​CE, c-UL, UL, PSE, RoHs, and WEEE

לפנות להצעת מחיר וזמן אספקה

For an attractive quote and to order the product

Call : 972-3-6176888

Message Us