טלפון

03-617-6888

רחוב כנרת 15, בני-ברק
5120260 ישראל

CALL US

972-3-6176888

15Kineret st,Beni-Brak

5120260 Israel

Annotator 300

Annotator 300

Annotator 300

HDCP-Compliant Annotation Processor with DTP Extension

Key Features

  • Live annotation capabilities plus high performance scaling and switching
  • Integrated three-input switcher with HDMI, DisplayPort, and universal analog video inputs
  • Three simultaneous video outputs
  • Integrated DTP output supports transmission of HDMI, analog audio, and control up to 330 feet (100 meters) over a shielded CATx cable
  • Supports DisplayPort input signals at resolutions up to 2560×1600
  • Advanced scaling engine with 30-bit precision processing and motion-adaptive deinterlacing for signals up to 1080i
ModelVersion DescriptionPart #
Annotator 300Annotation Processor

with DTP Extension

Collaborative Annotation Diagram

Annotator 300
Video input
   Number/signal type1 RGB, RGBcvS, component (interlaced, progressive, HD), S-video, composite video
1 HDMI/DVI (HDCP compliant)
1 DisplayPort (HDCP compliant)
   Connectors1 female 15-pin HD
1 female HDMI
1 female DisplayPort
   Nominal level1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levelsAnalog: 0.0 V to 1.0 Vp-p with no offset at unity gain
   Impedance75 ohms
   Horizontal frequency15 kHz to 100 kHz
   Vertical frequency24 Hz to 75 Hz
   Resolution range
      VGA and HDMI640×480 to 1600×1200 and 1920×1200*
NTSC, PAL, SECAM, 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2k
      DisplayPort640×480 to 1600×1200 and 2560×1600*
480p, 576p, 720p, 1080i, 1080p, and 2k
*reduced blanking
   Return loss<-30 dB @ 5 MHz
   DC offset (max. allowable)0.5 V
   StandardsDVI 1.0, HDMI, DisplayPort 1.1a, HDCP
Video processing
   Decoder12 bit digital (3D-adaptive comb filter)
   Analog sampling12 bits per color; 13.5 MHz standard (video), 170 MHz standard (RGB)
   HDMI pixel data bit depth8, 10, or 12 bits per channel; 165 MHz pixel clock
   Display Port pixel data bit depth8, 10, or 12 bits per channel; 270 MHz pixel clock
   Colors1 billion, (10 bit processing)
Video output
   Number/signal type2 HDMI/DVI (HDCP compliant)
1 DTP 330 or HDBaseT, configurable (HDCP compliant)
   Connectors2 female HDMI
1 female RJ-45
   Digital bit depth8 or 10 bit, automatic
   Vertical frequency23.98 Hz, 24 Hz, 25 Hz, 29.97 Hz, 30 Hz, 50 Hz, 59.94 Hz, 60 Hz
   Scaled resolution640×4808, 800×6008, 1024×7688, 1280×7688, 1280×8008, 1280×10248, 1360×7688, 1366×7688, 1440×9008, 1400×10508, 1600×9008,, 1600×12008, 1680×10508, 1920×12008
HDTV: 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048×10801,2,3,4,5,6,7,8
1 = 23.98 Hz, 2 = 24 Hz, 3 = 25 Hz, 4 = 29.97 Hz, 5 = 30 Hz, 6 = 50 Hz, 7 = 59.94 Hz, 8 = 60 Hz
   Video output power for active cables (HDMI pin 18)2.2 W total power for all HDMI ports, 1.1 W per HDMI port max
Interconnection between Annotator 300 and DTP/HDBT receiver
   ConnectorsFemale RJ-45
   Termination standardTIA/EIA T568B
   Signal transmission distance
      Resolutions up to 1920×1200 and 1080p
         DTP 330Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 TP cable
         DTP 230Up to 230' (70 m) using shielded twisted pair cable or XTP DTP 24 TP cable
   Cable requirementsSolid conductor, 24 AWG or better
   Cable recommendations400 MHz bandwidth, STP (shielded twisted pair)
    NOTEExtron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
    NOTEOutput signals:
DTP mode:    HDMI with embedded audio, analog audio, RS-232 and IR, and remote power
HDBT mode:  HDMI with embedded audio, RS-232 and IR
Audio input
   Number/signal type1 embedded digital audio from HDMI
1 embedded digital audio from DisplayPort
   Connectors1 female HDMI
1 female DisplayPort
Audio output
   Number/signal type2 embedded digital audio on HDMI
1 DTP 330 (embedded digital and remote balanced/unbalanced analog)
or HDBaseT (embedded digital)
   Connectors2 female HDMI
1 RJ-45
Sync
   Input typeRGBHV, RGBS, RGsB, RGBcvS, bi-level or tri-level component video
   Input standardsNTSC 3.58, NTSC 4.43, PAL, SECAM
   Input level2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB
   Input impedanceHorizontal: 75 ohms
Vertical: 510 ohms
Communication — signal processor
   Serial control port1 bidirectional RS-232, 3-pin captive screw connector
   Baud rate and protocol9600, 8 data bits, 1 stop bit, no parity (default)
   Serial control pin configuration1 = Tx, 2 = Rx, 3 = Gnd
   Contact closure1 rear panel 3.5 mm captive screw connector, 3 pole
   Contact closure pin configurationsPin 1 = input 1, 2 = input 2, 3 = input 3
   USB control port1 female mini USB on front panel
   USB standardsUSB 2.0, high speed
   Ethernet control port1 RJ-45 female connector
   Ethernet data rate10/100Base-T, half/full duplex with autodetect
   Ethernet protocolARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet, SMBv1
   Ethernet default settingsLink speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
   Web serverUp to 200 simultaneous sessions
40 MB nonvolatile user memory
   Program controlExtron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
Communications — external device (pass-through, unidirectional or bidirectional) (RS-232/IR over DTP)
    NOTEProtocol is mirrored between the connected DTP 330 endpoint and the “Over DTP” port on Annotator 300. Signals from a control device pass into the Annotator 300 “Over DTP” port, is embedded with the DTP signal, and sent to individual DTP 330 Rx endpoint for control of a remote sink device.
The “Over DTP” port is simply a pass-through connection to a DTP endpoint. There is no RS-232 or IR insertion from any Annotator 300 control port to the “Over DTP” port.
   Serial control pass-through ports
      Annotator 300 output/DTP RxRS-232 via (1) 3.5 mm, 5 pole captive screw connector (shared with IR port)
   Baud rates300 to 38400
   Protocol8 or 7 data bits
1 or 2 stop bits
no parity (default)
even or odd parity
   Serial control pin configuration1 = Tx, 2 = Rx, 3 = Gnd
   IR pass-through control portsTTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
      Annotator 300 output/DTP Rx(1) 3.5 mm captive screw connector, 5 pole (shared with RS-232 port)
   IR control pin configuration3 = Gnd 4 = IR Tx, 5 = IR Rx
Communication — annotation
   Number/signal typeUp to 25 USB devices (via hubs)
   Connectors3 USB type A connectors (2 on rear and 1 on front)
   USB standardsUSB 2.0, USB 1.1, USB 1.0 compatible
   USB data ratesLow speed (1.5 Mbps), full speed (12 Mbps)
USB device ports
Number/signal type(1) 3-port, USB hub
Connectors(2) female USB 2.0 type A (rear), (1) female USB 2.0 type A (front)
Maximum built-in USB HUBs1
Minimum built-in USB HUBs1
Available USB power500 mA per port
General
   Power supplyInternal
Input: 100-240 VAC, 50-60 Hz
   Power consumption37 watts
   Auxiliary power output
      USB5 VDC, 500 mA on each USB connector
      DTP outputSupports one endpoint (one DTP Rx)
   Temperature/humidityStorage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   CoolingFan, air flows from right to left (as viewed from the front panel)
   Thermal dissipation81.4 BTU/hr
   Mounting
      Rack mountYes, with pre-installed brackets.
      Furniture mountYes, with optional under-desk or through-desk mounting kit
   Enclosure typeMetal
   Enclosure dimensions1.75" H x 17.5" W x 9.5" D  (1U high, full rack wide)
(44 mm H x 445 mm W x 241 mm D)
(Depth excludes connectors and knobs.)
   Product weight5.4 lbs (2.4 kg)
   Regulatory complianceCE, c-UL, UL, C-tick, FCC Class A, ICES, VCCI, RoHS, WEEE

לפנות להצעת מחיר וזמן אספקה

For an attractive quote and to order the product

Call : 972-3-6176888

Message Us