DATAPATH VisionRGB-E1S DVI/RGB/HD Video Capture Card (PCI Express)

VisionRGB-E1S

Single channel RGB/DVI/HD video capture card
Four Lane PCI Express interface with a maximum data rate of 650 MB/sec
On card processor for real time mode and sink detection
Support for multiple capture cards allowing up to 32 capture channels (32 cards)
Maximum analog RGB video capture resolution of 2048×1536 x24bit
Maximum DVI capture resolution of 1920×1200 x24bit
Support for Windows® and Linux® (NOTE: Check Linux specific features with Sales)

VisionRGB-E1S

The VisionRGB-E1S captures the Analog/ DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.

When a Datapath graphics card is used, the VisionRGB-E1S transfers the data directly to the graphics card thereby increasing performance. The VisionRGB-E1S capture card sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance.

When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-E1S sends the data to system memory or direct to the graphics card, dependant on the software used for display.

The VisionRGB-E1S is an ideal solution for applications that require the capture of analog or DVI sources in real time. Typical applications include:

Viewing Analog or DVI sources from PCs, MACs, industrial or medical equipment, cameras and other video equipment
Streaming video applications
Video wall controllers

RGB Streaming

The VisionRGB-E1S is an ideal solution for applications that require the capture of analog or DVI sources in real time. Typical applications include: Viewing analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipment Streaming video applications and video wall controllers.

Video Streaming Support

Direct WDM streaming driver supports the following applications, to encode, record and stream video over networks or the internet:

Dataton WatchOut
Microsoft Expression Encoder
Microsoft Windows® Media Encoder
VideoLAN VLC
NorPix StreamPix
VitualDub
Adobe Flash Encoder
VidBlaster
AMCap and other DirectShow compatible software

For further details see the Datapath DirectShow SDK documentation supplied as part of a typical installation.

Software

The VisionRGB-E1S video capture card is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI or Analog source into the card, run the VisionRGB-E1S application to automatically detect the video source format and display the captured video in a window on your desktop.

Specification of the VisionRGB-E1S Video Capture Card:

Board Format	PCI Express x4 low profile card, 68.9mm x 167.6mm PCI Express bus master with scatter gather DMA providing Maximum data rate of 650 MB/s
Connectors	One DVI-I type connector
Maximum Sample Rate	170 MHz analogue RGB or 165 MHz DVI Analogue modes up to 340 MHz pixel clock can be captured using dual-pass sampling
Video Sampling	RGB: 24 bits per pixel/ 8-8-8 format
Video Capture Memory	32 MB, triple buffered
Analogue RGB mode support	640×480, 800×600, 1024×768, 1280×1024, 1600×1200, 1920×1080, 2048×1536, custom modes
DVI Single-link Mode Support	640×480, 800×600, 1024×768, 1280×1024, 1600×1200, 1920×1080, 1920×1200, custom modes
HD Modes	1080p, 1080i, 720p, 576p, 576i, 480p and 480i using a Component-DVI connector (HDCP not supported)
Input Mode Detection	Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal
Pixel Transfer Formats	RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels YUV: 4:2:2 Mono: 8 bit
Update Rate	User defined, captured frame rate will match the source. Providing max data rate (650 MB/s) is not exceeded Multi-buffered to eliminate tearing artifacts
Video Format Options	Analogue RGB plus HSink and VSink (5 wire) Analogue RGB with Composite sink (4 wire) Analogue RGB with Sync on Green/ YPbPr (3 wire) DVI Single Link
Operating System Support	Up to Windows® 10 Linux support (NOTE: Check Linux specific features with Sales)
Power Requirements	Max current at +3.3V – 0.25A Max current at 12V – 0.5A Max power – 6.8 Watts
Operating Temperature	0 to 35 °C/ 32 to 96 °F
Storage Temperature	-20 to 70 °C/ -4 to 158 °F
Relative Humidity	5% to 90% non-condensing

For an attractive quote and to order the product

DATAPATH VisionRGB-E1S DVI/RGB/HD Video Capture Card (PCI Express)

VisionRGB-E1S

VisionRGB-E1S

Video Streaming Support

Software

Specification of the VisionRGB-E1S Video Capture Card:

Call : 972-3-6176888

Message Us