Board Format |
Full size 8 lane PCIe 3-0 interface, 111mm x 312mm (H x L) |
Connectors |
Two DMS59 high density video connectors |
Maximum Sample Rate |
170 Mpixels per second analogue RGB or 165 MHz DVI
Analogue modes up to 340 MHz pixel clock can be captured using dual-pass sampling |
Maximum Data Rate |
800 MB/s bandwidth per capture processor, 3.2 GB/s for the card |
Video Sampling |
RGB: 24 bits per pixel/ 8-8-8 format |
Video Capture Memory |
256 MB per capture channel, triple buffered |
Analogue RGB Mode Support |
640×480, 800×600, 1024×768, 1280×1024, 1600×1200, 1920×1080, 1920×1200 and custom modes |
DVI Single-Link Mode Support |
640×480, 800×600, 1024×768, 1280×1024, 1600×1200, 1920×1080, 1920×1200 and custom modes |
HD Modes |
1080p, 1080i, 720p, 576p, 480p and 480i using a Component-DVI connector.
For HDCP support contact the sales department for more information |
Input Modes Detection |
Direct DMA to physical or virtual memory buffers with full scatter-gather support
DMA bandwidth: up to 800MB/s
16 independent DMA streams: Any mix of HD and SD sources, colour space, cropping and scaling parameters |
Pixel Transfer Formats |
RGB: 5-5-5, 5-6-5 or 8-8-8 (24 bit, 32 bit) pixels
YUV: 16 bit (4:2:2)
MONO: 8 bit |
Update Rate |
User defined, capture frame rate will match the source providing max data rate (800MB/s) is not exceeded.
Multi-buffered to eliminate tearing artifacts |
Video Format Options |
Analogue RGB plus HSync and VSync (5 wire)
Analogue RGB with Composite Sync (4 wire)
Analogue RGB with sink on Green/ YPbPr (3 wire)DVI Single Link, HDMI 1.3 |
Operating system support |
Up to Windows® 10 and Linux support (NOTE: Check Linux specific features with Sales) |
Power Requirements |
Max current at 1.9A @ 12V
Max current at 2.5A @ 3.3A
Max power 31 Watts |
Operating Temperature |
0 to 35 °C/ 32 to 96 °F |
Storage Temperature |
20 to 70 °C/ -4 to 158 °F |
Relative Humidity |
5% to 90% non-condensing |