Provides simultaneous SD and HD video capture through one channel of DVI-I or HDMI capture and one channel of composite video capture.
The VisionAV is a four lane PCI Express capture card providing up to 800MB/s bandwidth from the capture engine. The VisionAV has up to 256 MB buffer memory, enabling triple buffering for all video modes for tear free playback. It can also capture digital video for progressive and interlaced modes up to 4096×4096 resolutions to a maximum of 165 MHz pixel clock for DVI and 170 MHz for analogue RGB. This card provides HDMI audio capture and streaming from DVI Channel, as well as balanced and unbalanced analogue audio capture.
For an application case study using this capture card, click below: Datapath capture cards help record high quality Rich Media presentations
The Vision range provides high performance DMA to system memory or direct to graphics memory with scatter gather, allowing for low latency fast frame rates in all applications. The complete range of Datapath video capture cards is supported by a generic Windows Vision driver and command line interface also supporting DirectShow and RGBEasy SDK.
A single Vision device supports up to 16 independent scale factors, colour spaces and frame rate clients. The Datapath capture cards have timestamp support for capture synchronisation across inputs, cards and systems. This is for use with edge blending, frame stitching, stereoscopic and many more applications using gen-locked sources.
The VisionAV has two independent video capture channels – one supporting HD capture and a second simultaneously accepting Standard Definition composite video. The VisionAV also adds analog audio capture, which can be perfectly synchronised with either video capture channel.
The High Definition signals are input via a DVI-I connector and can support HDMI, DVI, RGB and analog Component (YPbPr) video formats all at resolutions up to 4096 x 4096 pixels and supports 1080p (1920×1080) at 60 frames per second. The Standard Definition channel accepts composite video on a single RCA connector and can auto-detect between PAL, NTSC and SECAM formats up to 720×576 at 16 bit colour.
The VisionAV captures both video channels simultaneously and triple buffers them into onboard storage, alongside an audio stream that can be selected from the HDMI or analogue audio port. This data can then be processed and copied using DMA transfers to the host system for display, storage or streaming.
The VisionAV is an ideal solution for applications that require the capture of analogue or DVI sources in real time. Typical applications include capturing analog or DVI sources from PCs, MACs, industrial/medical equipment, cameras and other video equipment streaming video applications and video wall controllers.
Adding support for simultaneous analogue and digital audio capture makes this a versatile capture card for streaming, webcasting, video conference and many other applications.
Direct WDM streaming driver supports the following applications, to encode, record and stream video over networks or the internet:
For further details see the Datapath DirectShow SDK documentation supplied as part of a typical installation.
A single Vision device supports up to 16 independent scale factors, colour spaces and frame rate clients, which enables multiple streams to be sent to and from the card at the same time in different formats.
Supports timestamp for capture synchronisation across inputs, cards and systems.
For the use with edge blending, frame stitching, stereoscopic and many more applications using gen-locked sources.
Flexible and configurable preferred mode EDID Management
Allows programming of custom EDID parameters including ‘Preferred Mode’
Low input to output capture latency
DMA to third party graphics vendors back and front buffers via Direct3D
Compatibility with AMD DirectGMA
Compatibility with Nvidia GPUDirect
Signal detection
VisionAV capture card detection of HDMI, DVI, VGA 5 wire, 4 wire, 3 wire, component and composite video, balanced, unbalanced and digital audio detection.
Additional Vision cards include video capture for SDI and DL-DVI input
Vision driver & command line interface
Supplied with a standard application for full control of any Vision capture card, this includes GUI’s for window properties, input settings, on screen display and EDID configuration.
The Vision application also includes a comprehensive command line interface for all GUI controls.
RGBEasy*
SDK for advanced audio and video control
Sample applications including low latency DirectX rendering
DirectShow
DirectShow SDK
Sample applications including AV encoding
SDK diagnostic transform filters
Kernel Mode – WDM video capture filters (crossbar required)
User Mode – Additional support for PiP, IAMStream control and cropping
| Board Format | PCI Express x4 half size plug-in card, 110mm x 170mm |
| Connectors (main board) | 2 x DVI-I, 1 x RCA (female) |
| HDMI Capture | Supports HDMI 1.3 to 225 MHz (inlcuding deep colour modes) HCDP is supported when used with Datapath graphics cards HDMI audio can be selected as source for audio streaming Incorporates TMDS equaliser to support up to 20m cables |
| DVI Capture | Supports DVI 1.0 RGB 24 bit capture to 165 MHz Incorporates TMDS equaliser to support up to 20m cables |
| VGA/ YPbPr Capture | Triple ADCs sampling up to 170Msps. Full 4:4:4 sampling, 8bits per colour 5-wire, 4-wire or sync-on-green signal format |
| Composite Video Capture | CCIR601 sampling, PAL, NTSC, SECAM formats automatically detected |
| Audio Capture | Stereo Line-In/ Stereo balanced inputs with programmable gain (+/-12dB) 16 bit sampling at 44.1/ 48/ 96 kHz Analogue stereo line-out for direct passthrough of selected input at up to 64kHz sampling, sourced from analogue input or HDMI channel |
| Video Capture Memory | 256MB high bandwidth frame buffer supports triple buffering of HD and SD video Local storage of complex scatter-gather tables for DMA engine (eliminates read overhead) |
| Video Processing | Polyphase FIR scaling engine (7×5) for hardware downscaling and upscaling Colour space conversion allows captured data to be transferred in any format:)
|
| Video Capture Memory | 256MB high bandwidth frame buffer supports triple buffering of HD and SD video Local storage of complex scatter-gather tables for DMA engine (eliminates read overhead) |
| DMA Engine | Direct DMA to physical or virtual memory buffers with full scatter-gather support DMA bandwidth: up to 800 MB/s 16 independent DMA streams: Any mix of HD and SD sources, colour space, cropping and scaling parameters |
| Operating System Support | Up to Windows ® 10 and Linux support (NOTE: Check Linux specific features with Sales) |
| Power Requirements | Max current at 12V – 1A Max current at 3.3V – 1A Thermal dissipation – 15.5 W |
| Operating Temperature | 0 to 35 °C/ 32 to 96 °F |
| Storage Temperature | -20 to 70 °C/ -4 to 158 °F |
| Relative Humidity | 5% to 90% non-condensing |
For an attractive quote and to order the product
דברו איתנו:
שעות הפעילות:
ימים א'-ה' 09:00-17:00
ימי ו' סגור
טלפון: 03-617-6888
מזכירות: שלוחה 0
מכירות: שלוחה 1
תמיכה טכנית: שלוחה 2
מעבדה: שלוחה 3
הנהלת חשבונות: שלוחה 4
יבוא : שלוחה 5
קישורים באתר
דפים באתר
© 2022 Copyrights. All rights reserved
