DTP DVI 4K 230 Rx

DTP Receiver for DVI

Key Features

Receives single link DVI-D plus control and analog audio up to 230 feet (70 meters) over a shielded CATx cable
Supports computer and video resolutions up to 4K
Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
Compatible with CATx shielded twisted pair cable
Accepts additional analog stereo audio signals
JITC Certified

Model	Version Description	Part #
DTP DVI 4K 230 Rx	DVI Rx – 230 feet (70 m)	60-1272-13
DTP DVI 4K 330 Rx	DVI Rx – 330 feet (100 m)	60-1360-13

The Extron DTP DVI 4K 230 Rx is a digital twisted pair receiver that works with Extron DTP^®‑enabled products to send DVI‑D video, audio, and bidirectional RS‑232 and IR signals up to 230 feet (70 meters) over a shielded CATx cable. It provides an economical and effective means for extending single link DVI‑D or HDMI signals. In addition, the DTP DVI 4K 230 Rx accepts analog stereo audio signals from a DTP‑enabled product over the same shielded twisted pair cable. It supports video signals at resolutions up to 4K. The compact enclosure size and remote power capability make the DTP DVI 4K 230 Rx ideal for discreet placement in lecterns, behind flat-panel displays, or wherever needed to meet application requirements.

DTP DVI 230 4K Tx/Rx

specification

Frame rate¹

24, 25, 30, 50, or 60 fps

Chroma sampling¹

4:4:4, 4:2:2, or 4:2:0

Color bit depth¹

8 bits per color

Signal type

HDMI 1.4, HDCP 2.3

Max. video data rate

10.2 Gbps (3.4 Gbps per color)

NOTE	¹Subject to the maximum data rate limit. Use our calculator (www.extron.com/8Kdatarate) to determine video parameters supported by this data rate.

NOTE	This product consists of a transmitter (DTP DVI 4K 230 Tx) and a receiver (DTP DVI 4K 230 Rx), sold separately, with a twisted pair cable linking the transmitter and receiver.

NOTE	*Appropriate DVI-D to HDMI cables or adapters are required for DVI signal input/output.

Video

Maximum data rate

10.2 Gbps (3.4 Gbps per color)

Maximum pixel clock

300 MHz

Resolution range

Up to 2560×1600* @ 60 Hz or
4K (4096×2160) @ 30 Hz, UHD (3840×2160) @ 30 Hz,
4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
(* reduced blanking)

Color bit depth

8, 10, or 12 bits — subject to the maximum data rate limit

Formats

RGB and YCbCr digital video

Standards

DVI 1.0, HDMI 1.4, HDCP 2.3, CEA-861E

Video input — transmitter

Number/signal type

1 single link DVI-D (or HDMI*) input
1 single link DVI-D (or HDMI*) local loop-through

Connectors

2 female DVI-I

Interconnection between transmitter and receiver

Connectors

1 female RJ-45 per unit

Termination standard

TIA/EIA T568B

Signal transmission distance

1080p @ 60 Hz

Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable

2560×1600 @ 60 Hz

Up to 130' (40 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable

4K/UHD @ 30Hz and 60 Hz

Up to 130' (40 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable

Cable requirements

Solid conductor, 24 AWG or better

Cable recommendations

400 MHz bandwidth, STP (shielded twisted pair)

NOTE	Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.

Video output — receiver

Number/signal type

1 single link DVI-D (or HDMI*)

Connectors

1 female DVI-I

Audio

Gain

Unbalanced output: 0 dB; balanced output +6 dB

Frequency response

20 Hz to 20 kHz, ±0.5 dB

THD + Noise

0.03% @ 20 Hz to 20 kHz at maximum output

S/N

>90 dB, at maximum output (15 dBu), balanced (unweighted)

Stereo channel separation

>80 dB @ 1 kHz to 20 kHz

Audio input

Number/signal type

1 PC level stereo, unbalanced

NOTE	Analog audio is not embedded onto the digital video signal. Embedded digital audio is not de-embedded from the digital video signal.

Connectors

(1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground)

Impedance

>10k ohms, DC coupled

Nominal level

-10 dBV (316 mVrms)

Maximum level

+7 dBV (unbalanced)

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output

Number/signal type

1 stereo (2 channel), balanced/unbalanced

Connectors

(1) 3.5 mm captive screw connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±0.1 dB channel to channel

Maximum level (600 ohm)

>+11 dBu, balanced

Communications — external device (pass-through, unidirectional or bidirectional)

Serial control port input/output

Transmitter

RS-232 via (1) 3.5 mm, 5 pole captive screw connector for RS-232 control (±5 V) (connector is shared with IR control port)

Receiver

1 set of proprietary signals on a female RJ-45 jack

Serial control port output/input

Transmitter

1 set of proprietary signals on a female RJ-45 jack

Receiver

RS-232 via a 3.5 mm, 3 pole captive screw connector

Baud rate and protocol

300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity

Serial control pin configuration

1 = Tx, 2 = Rx, 3 = GND

IR control port

(1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz

IR control pin configuration

3 = GND, 4 = IR Tx, 5 = IR Rx

General

Power supply

External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts

Power consumption

Transmitter

Device

3.4 watts

Device and power supply

4.8 watts

Remote power budget

12 watts

Receiver

Device

4.2 watts

Device and power supply

5.8 watts

Remote power budget

12 watts

NOTE	Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable.

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Convection, no vents

Thermal dissipation

Transmitter

Device

10.3 BTU/hr

Device and power supply

15.1 BTU/hr

Receiver

Device

13.0 BTU/hr

Device and power supply

18.6 BTU/hr

Mounting

Rack mount

Yes, with optional 1U high rack shelf

Furniture mount

Yes, with optional under-desk mounting kit

Enclosure type

Metal

Enclosure dimensions

Transmitter

1.0" H x 4.3" W x 3.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)

Receiver

1.0" H x 4.3" W x 6.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)

Product weight

Transmitter

0.5 lbs (0.3 kg)

Receiver

1.0 lb (0.5 kg)

Regulatory compliance

CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES, VCCI,
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply.
Complies with the appropriate requirements of RoHS, WEEE

NOTE	**CE and FCC testing is conducted with STP (shielded twisted pair) I/O cable.

קשור

For an attractive quote and to order the product

DTP DVI 4K 230 Rx

DTP DVI 4K 230 Rx

קשור

Call : 972-3-6176888

Message Us